Zhaga® 18 Streetlight Controller NanoLite™ G4
UL2034Y
Designed for LED lighting systems and built to Zhaga Book 18, this controller gives interoperability and tool-free installation on a standard Zhaga receptacle. Supports DALI-2® and D4i® control signals, weather-resistant construction.
Features
Up to 8 DALI / DALI-2 drivers, individually addressed and monitored
Power measurement via DALI, D4i energy registers per driver
Astronomical calendar and layered time-based dimming
Light intensity and tilt sensors, surge protection
LumaLink™ configuration app (iOS & Android), NFC activation
Push-and-twist installation
Fully documented open communication protocol
Operating temperature
−20 °C … +60 °C
IP rating
IP67 · IK09
Communication
LoRaWAN® v1.1 · NB-IoT · NanoLite™
Activation
OTAA
Weight
40 g
Control output
DALI® / DALI-2®, D4i®
Measured
Reported over the network and in LumaLink™.
Lamp on-time
Ambient light
Controller temperature
D4i energy registers per driver
Monitored
Events and faults raised by the controller.
Lamp / driver fault
Control gear faults
Tilt and collision
GPS position (option P)
Technical data
From the datasheet, rev. 3 · 04.04.2024.
| Communication | LoRaWAN® | NB-IoT | NanoLite™ |
|---|---|---|---|
| Network interface | LoRaWAN® 1.1 Class C | LTE Cat-NB1 / NB2 | None |
| RF frequency | 868 / 915 / 923 MHz | B3 · B8 · B20 | – |
| Rx sensitivity | −137 dBm @ 125 kHz, SF12 | −108 / −107 dBm | – |
| Tx power | up to +22 dBm, by region | up to +23 dBm | – |
| Network security | AES-128 security keys | APN / VPN | – |
| GPS | Option P | Included | Option P |
| SensorLink™ mesh | Option S | n/a | Option S |
| LumaLink™ | Config, diagnostics, firmware | Config, diagnostics, firmware | Config, diagnostics, firmware |
| Firmware update | OTA (2.4 GHz) | OTA (2.4 GHz) | OTA (2.4 GHz) |
Supply
Power supply24 V DC (21.6 – 26 V)
Peak consumption1 W @ 24 V
Surge protectionVia DALI-2 control gear
Interfaces
DALI control deviceUp to 8 DALI ballasts
DALI power supplyInternal 19 V, auto-detect external
LSI inputAlert or dim-level trigger
Sensors
Light sensorIntegrated, set threshold
Tilt sensor3-axis
Real time clockYes, supercap backup
Lamp control
Dimming range0 – 100 %, linear / log
Control interfaceDALI-2 (IEC 62386), D4i, SR
D4i reported parametersV, W, Wh, PF, lamp-on time
Environmental
Ingress protectionIP67 (IEC 60529)
Impact protectionIK09 (IEC 62262)
Operating temperature−20 °C … +60 °C
Mechanical & compliance
Weight40 g
DimensionsØ 47.3 × 33.4 mm, ABS
StandardsEN 61347-1 / -2-11, EN 300220, EN 62368, EN 301489, EN 62479, EN 50581
CertificationsCE, SR Signify
Wiring
Zhaga® Book 18 receptacle, 4-pin.
1+24 V auxiliary power supply
2DALI − / ground for +24 V
3DALI +
4LSI, logical signal input
